Home > Electric Torque Screwdrivers > Low Voltage DC > ASG TORQUE SCREWDRIVER, MODEL CL-4000, ELECTRIC, 0.5" - 4.5" Lbs., 1/4" HEX OR 4MM DRIVE

ASG TORQUE SCREWDRIVER, MODEL CL-4000, ELECTRIC, 0.5" - 4.5" Lbs., 1/4" HEX OR 4MM DRIVE

ASG TORQUE SCREWDRIVER, MODEL CL-4000, ELECTRIC, 0.5" - 4.5" Lbs., 1/4" HEX OR 4MM DRIVE
Item# CL-4000
MSRP: $535.92
Our price: $515.45
Select Drive Size: 

Product Description

DC Electric Screwdrivers
Small Size - Inline

  • Designed for production environments where torque repeatability is a must to maintain quality standards
  • Intended for vertical insertion of fasteners
  • Also recommended wherever clean room assembly or static control is an issue
  • Torques are adjusted externally; Tamper-proof torques are available
  • Drivers available in Small, Medium, Standard & Large Sizes

    • CL-4000 (.5-4.5 Ibf·in) Most versatile light torque tool in the CL-Series
    The CL-4000 has a higher torque output than the CL-3000 tool. It comes with your choice of a 1/4" hex collet or a 4.0 mm collet. If you are considering using this tool with very small fasteners (number 0 or smaller) or with a vacuum pick-up system, it is recommended that the 4.0 mm collet type tool be ordered. The 4.0 mm collet system will provide more versatility in bit selection for small fasteners than the 1/4" hex system. Locking torque nut for CL-3000 or CL-4000 is part number 64220. See reference table following for additional specifications. .
    Exploded Parts View - CL-4000 1/4" Hex
    Exploded Parts View - CL-4000 4mm

    Part Driver /
    		*RPM @ RPM @ Lt. Duty Hvy. Duty
    		Dia- WT

    		Fast- Cord
    Number Model Torque 30VDC 20VDC*** Spring Spring Lngth meter oz. Bits Amps eners Lng*
    64107 CL-2000 2.7-27 ozf.in 680 490 Gold Brown 6 1/2" 1" 7.35 4.0 mm 1.5 #000-#2 4'
    64109 CL-3000 3-25 ozf.in 1000 670 Yellow Blue 6 3/8" 1 1/8" 12.5 4.0 mm 1.5 #00-#1 4'
    64110 CL-4000 .5-4.5 lbf.in 1000 670 Blue Red 7 1/2" 1 1/8" 14 1/4" hex 1.5 #0-#3 4'
    64111 CL-4000 .5-4.5 lbf.in 1000 670 Blue Red 7 1/2" 1 1/8" 14 4.0 mm 1.5 #0-#3 4'
    64116 CL-6000 1.7-8.5 lbf.in 790 500 Brown Brown 8 1/2" 1 3/8" 21.5 1/4" hex 2.5 #1-#6 6'
    64121 CL-6500 1.2-14 lbf.in 910 600 White Yellow 9" 1 3/8" 23.5 1/4" hex 2.5 #1-#6 6'
    64126 CL-7000 2.5-20 lbf.in 750 500 Yellow Purple 10" 1 3/8" 27 1/4" hex 2.5 #2-#8 6'
    64129 CL-7000* 3.5-24 lbf.in 550 330 Yellow Purple 10" 1 3/8" 27 1/4" hex 2.5 #2-#8 6'

     

    *See replacement cord sets.
    **Part No. 64129 is a modified version of the CL-7000. It has been geared down for lower speed, yet provides higher torque. It is recommended for applications that require more torque than the standard CL-7000 can supply.
    *** At lower voltages, full performance of tool may not be achievable.
    *Approximate RPM